do not scale from this print .253 ref (typ) 6.42 * "c" ref this product manufactured with lead-free processing pb qcd-xx-01 qcd-xx-02 sub-ttf-30100-07-xx-xx.xx (see table 1 for qty) "b" ref (typ) length: xx.xx + "l" ref (see table 4) "a" ref (typ) .565 ref (typ) 14.35 .775 19.69 ref (typ) length: xx.xx 01% 'a' sts-01 (tighten to 1.4 - 1.7 in-lbs) (4 plcs) c1 first end second end 01 n-1 (see table 3) n (see table 3) 02 n (see table 3) n-1 (see table 3) 01 02 sub-eqdp-x-xxx-xx-xx sub-eqdp-x-xxx-xx-xx eqdp-xxx-xx.xx-xxx-xxx-x-x no of positions -014, -028, -042, -056 (per row) length -xx.xx (inches) (03.75[95.3] min) (see note 2) (see note 8) first end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 2) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) second end wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 9, sheet 6) -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 3) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) -f: screw option first end only -s: screw option second end only -b: screw option both ends -l: first end rt1 option (see fig. 6, sht 6) -r: second end rt1 option (see fig. 6, sht 6) -d: both ends rt1 option (see fig. 6, sht 6) -1: first screw option, second end rt1 option (see fig. 6, sht 6) -2: first end rt1 option, second end screw option (see fig. 6, sht 6) -n: no caps (see fig. 3, sheet 5 for edge mount end options) (see fig. 4, sheet 5 for double vertical end options) (see fig. 5, sheet 5 for no caps options) (leave blank for standard caps both ends) end option ** ** ** ** ** hdrl-11 (see note 5) length ref detail 'a' scale 2.5 : 1 c fig. 1 c3 c2 vertical (eqdp-028-xx.xx-str-str-1 shown) * -dv end options only ** = not engineering approved j j j j j sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 1 sheet scale: 1:1 c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-ttf length is equal to eqdp length. 3. all assemblies to be 100% electrically tested for shorts and opens. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-ttf not shown in this view for clarity; hdrl-11 to be centered on lower sub-ttf as shown; hdrl-11 is to contain part number, shop number, line number & date code. 6. package assemblies in static disposition bags. 7. parts to be processed per samtec acceptablility requirements: hdr-pi-01 "cable assembly workmanship standards". 8. cable lengths longer than 40.00 inches are not supported by s.i. test data. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision j
-ttr t1 t14 n n-1 1 2 t b -ttl n n-1 t14 t1 1 2 t b 1 2 b1 b14 n n-1 n n-1 b1 b14 1 2 -tbr b t -tbl b t -str n-1 n t14 t1 2 1 t b -stl 2 1 t14 t1 n-1 n t b n-1 n 2 1 b14 b1 2 1 n-1 n b14 b1 -sbr t b -sbl t b first end - vertical (see table 9, sheet 7) sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 2 sheet scale: 1.25:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
-ttr t1 t14 2 1 n n-1 t b b14 b1 n n-1 2 1 -tbr t b -ttl t1 t14 1 2 n-1 n t b b1 b14 1 2 n-1 n -tbl t b -str t1 t14 2 1 n n-1 t b b14 b1 2 1 n n-1 -sbr t b -stl t1 t14 n-1 n 1 2 t b n-1 b14 b1 n 1 2 -sbl t b second end - vertical (see table 9, sheet 7) sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 3 sheet scale: 1.25:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"d" ref length: xx.xx + "l" ref (see table 4, sheet 1) qcd-xx-03 .271 6.88 ref sub-eqdp-x-xxx-03-xx t1 t14 -teu 2 1 n-1 n b t b14 b1 -ted 2 1 n-1 n b t t1 t14 -seu n n-1 1 2 b t b14 b1 -sed n n-1 1 2 t b -teu t14 t1 n-1 n 2 1 b t -ted b1 b14 n-1 n 2 1 t b -seu t14 t1 1 2 n n-1 b t -sed b1 b14 1 2 n n-1 t b fig. 2 edge mount (no captive panel screws) (eqdp-014-xx.xx-teu-str-x shown) (same as fig. 1, unless otherwise stated) first end - edge mount (see table 9, sheet 7) second end - edge mount (see table 9, sheet 7) sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 4 sheet scale: 1:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"e" ref .500 12.70 ref (typ) (fully tightened) cps-4-40-01-x fig. 3 edge mount (with captive panel screws) (eqdp-014-xx.xx-seu-xxx-1-f shown) (same as fig. 2, unless otherwise stated) "f" ref qcd-xx-03-cps (2 plcs) "g" ref "h" ref .129 ref (typ) 3.28 .250 6.34 (typ) .228 5.79 ref "j" ref qcd-xx-02-sdo qcd-xx-01 (see table 9) "m" (see table 9) "n" sub-eqdp-x-xxx-xx-xx sub-eqdp-x-xxx-03-xx sub-ttf-xx-xx-xxx-xx.xx apply uv epoxy to all cable ends (height not to exceed .089[2.26] above pcb surface) double vertical (with screw down option) (eqdp-014-xx.xx-ttr-xxx-1-f shown) (same as fig. 1, unless otherwise stated) fig. 4 (eqdp-014-xx.xx-teu-str-n shown) (same as fig. 1, unless otherwise stated) fig. 5 sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 5 sheet scale: 1.25:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
length: xx.xx = l ref (see table 4, sheet 1) p ref s ref "t" ref fig 6 (eqdp-014-xx.x-stl-ttr-1-d shown) (same as fig 1, unless otherwise stated) j .326 8.29 ref qcd-xx-14 qcd-xx-01 .496 12.61 ref qcd-xx-01 qcd-xx-14 sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 6 sheet scale: 2:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
for rt1 option sub-assembly add -rt1 to the end of the sub-assembly callout listed in the table above. j sheet of 0.8mm high-speed twin-ax cable assembly by: eqdp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 11/13/03 7 7 sheet scale: 1.25:1 revision j c:\enterprisevault\dwg\misc\mktg\eqdp-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
